Silent-call 1008-4 Manuel d'utilisateur télécharger pdf (Page 20)

BEFORE PERMANENTLY INSTALLING THE DETECTOR.

To check, perform the test described in the TESTING SIGNAL

STRENGTH section of this manual. To mount the detector, perform

the following steps:

1. Once a suitable location has been determined, install the mounting

base on the ceiling or on the wall (if local ordinances permit). Use

the two screws and anchors provided.

2. Turn the detector in a clockwise direction in the mounting base

until it clicks into place.

3. Test the detector immediately after completing the installation as

described in the TESTING section of this manual.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Silent-call 1008-4 Manuel d'utilisateur Page 20