Silent-call Gentex 710ls Manuel d'utilisateur télécharger pdf

710/713CS/LS

7109/7139CS/LS

SERIES

• 177 Candela Rating (UL1971)

• Solid State 90dBA Horn

• Temporal 3 Evacuation Sounding Device (713CS/LS & 7139CS/LS Series)

• Nominal 2.5% Sensitivity

•

5-to-1 Signal-to-Noise Ratio

• Full Function Test Switch—Patented Three Position Test

•

Fully Insect Screened

• Quick-Disconnect Wiring Harness (CS Models)

• 9 VDC Battery Back-Up (7109/7139CS/LS) w/Audible Low Battery Chirp

(Visual Does Not Operate on Battery Back-Up)

• Form C Auxiliary Relay Contacts for

Remote Annunciation (CS Models)

•

andem Connection up to 6 Detectors Per System (CS Models)

•

9 Foot Line Cord (LS Models)

• Mounting Hardware

• Warranty is 1 Year From Date of Purchase

•

Dry Contacts Will Activate From the

andem Wire

• Relays Operate on Battery Back-Up, Visual Does Not Operate

• Horn Frequency 3100Hz (Nominal)

Photoelectric Smoke Alarm

with Visual Signaling Appliance

Product Listings

Standard Features

Applications

The 710/713CS/LS and 7109/7139CS/LS

photoelectric single station

smoke alarms are designed to give reliable early warning of the

presence of smoke where both audible and visual alarms are required.

The series features a 90dBA solid state piezo signal and a 177 Candela

strobe with “FIRE” lettering. The strobe is listed per UL 1971.

The 713/7139 Series provides the temporal 3 evacuation tone as a

standard feature. When testing the 713/7139 Series it may take up to 16

seconds longer to go in or out of alarm.

The smoke alarm operates on the light scattering principle, a superior

method of detection in smoldering fires, utilizing a pulsing LED light

source and a photodiode sensor in a fully screened sensing chamber.

Every 4 to 5 seconds the pulsing LED emits an infrared beam that by

passes the photodiode under normal conditions. However, when smoke

enters the sensing chamber, the infrared beam is deflected onto the

sensor by the smoke particles. The LED pulse rate increases to 8 times

the normal rate, and after the photodiode confirms that smoke is present

for 2 consecutive pulses, it will produce the signal necessary to trip an

alarm.

Upon activation, the alarm will emit a 90dBA local audible signal and

activate the high intensity strobe. During the alarm period the strobe will

flash at a brightness of 177 Candela 60 times per minute. After the

smoke has cleared from the detector, the unit will revert to the normal

stand-by condition.

• UL 217

• CAN/ULC 552-02/553-02 Listed

(710CS & 7109CS Only)

• BFP (City of Chicago)

•

BS+A/MEA

#285-91-E

•

MSFM Listing #1929

• CSFM Listing #7257-569:104 (710/713CS/LS)

• CSFM Listing #7257-569:118 (7109/7139CS/LS)

Also UL

1730 listed for Commercial Residential

and Commercial Residential Multiple-station

Smoke Alarms.

• NFPA 72

• Americans with Disabilities Act (ADA)

Product Compliance

1 2 3 4

Résumé du contenu

Page 1 - Photoelectric Smoke Alarm

710/713CS/LS7109/7139CS/LSSERIES• 177 Candela Rating (UL1971)• Solid State 90dBA Horn• Temporal 3 Evacuation Sounding Device (713CS/LS & 7139CS/L

Page 2

NOTES:Candela Rating: 177 Candela UL Listed Strobe Light Flash Rate per Minute : 60 MinimumAvailable in square configuration only.Ceilin

Page 3 - Electrical Specifications

SMOKEDETECTORPOWERAUXILIARYCONTACTSWiring Diagram710CS7109CS713CS7139CS710CS7109CS713CS7139CSHOTNEUTTANDEM11110493RELAY CONTACTSRATED LOAD RESISTIVE0.

Page 4

710/713CS/LS7109/7139CS/LSSERIESGX07905-4Architect & Engineering SpecificationsThe Photoelectric Detector Shall be a Gentex Model 710/713LS/7109/7

Commentaires sur ces manuels

Pas de commentaire

Silent-call Gentex 710ls Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Silent-call Gentex 710ls. Silent Call Gentex 710ls User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Silent-call Gentex 710ls